I've managed to download a fully working 4.3 md5 for the Sprint Galaxy S3. I've uploaded it to Mediafire so you don't have to deal with slow download speeds. Took me 7 hours to download this from a different website. i hope you all enjoy :) PM me if the link gets taken down, and i'll re-upload it. This is Android 4.3 for the Sprint Galaxy S3. this firmware is to be flashed with Odin, (I've provided 3.07 on Mediafire as well) which you can download below, Samsung device drivers (Version 1.3.15.0000.0) are included as well, and the Stock 4.3 firmware in the link below. You will also need Winrar to extract and run Odin.
Samsung Drivers: http://developer.samsung.com/board/d...hId=0000000001
Sprint GS3 4.3 stock Firmware: https://www.mediafire.com/?nq2ugt0oo9tlj65
Winrar: http://www.rarlab.com/download.htm
Note: this is NOT rooted and it DOES have knox.
For beginners with flashing firmware on Odin, after you download the S3 firmware, put your S3 into Download mode. If you have a USB jig like me, you plug that in. If not, while the device is turned off, hold the volume DOWN, POWER button, and HOME button.
Run Odin as an administrator, make sure the Auto Reboot and F. Reset Time boxes ARE checked, the click the PDA button, navigate to the place where you downloaded the firmware too, and click it. It will take a second to check the md5 file, Odin will freeze and not respond, so let it load. if it takes 5 minutes, close Odin. If not, then Odin will unfreeze and the start button will be able to be clicked.
Click the button, sit back for 5-15 minutes, and let Odin work it's magic. Odin runs best if it is the only application running.
I have experienced when restoring from ROMs that sometimes the phone will not fully boot. if you are restoring from a ROM, go into Clockworkmod or TWRP, wipe data, cache, dalvik cache, and wipe system. Yes, wipe system. If you don't have CWM or TWRP, the try using the default recovery and wiping data and cache. If you don't know how to boot into recovery mode, hold the volume UP button, the POWER button, and the HOME button until you see blue text in the top right screen, then let go. when the text disappears, hold that button combo again until you see the android with an open chest. Then proceed to flash back to stock with Odin. This will ONLY work with Odin. I don't think it matters which version of Odin you use. You CANNOT install this straight from system recovery or Clockworkmod, or TWRP. I hope Sprint GS3 owners are happy with this. :3
I am in no way affiliated with Samsung. I am just providing a mirror for those of you stuck with really slow downloads because people want to make money with ads. I have played no part in making this software, i have not tampered or edited it in no way at all. This is literally stock Android 4.3 for the Sprint Galaxy S3. I also am providing the files for Odin and the Samsung drivers because people have trouble finding both of those files. they are not mine.
Samsung Drivers: http://developer.samsung.com/board/d...hId=0000000001
Sprint GS3 4.3 stock Firmware: https://www.mediafire.com/?nq2ugt0oo9tlj65
Winrar: http://www.rarlab.com/download.htm
Note: this is NOT rooted and it DOES have knox.
For beginners with flashing firmware on Odin, after you download the S3 firmware, put your S3 into Download mode. If you have a USB jig like me, you plug that in. If not, while the device is turned off, hold the volume DOWN, POWER button, and HOME button.
Run Odin as an administrator, make sure the Auto Reboot and F. Reset Time boxes ARE checked, the click the PDA button, navigate to the place where you downloaded the firmware too, and click it. It will take a second to check the md5 file, Odin will freeze and not respond, so let it load. if it takes 5 minutes, close Odin. If not, then Odin will unfreeze and the start button will be able to be clicked.
Click the button, sit back for 5-15 minutes, and let Odin work it's magic. Odin runs best if it is the only application running.
I have experienced when restoring from ROMs that sometimes the phone will not fully boot. if you are restoring from a ROM, go into Clockworkmod or TWRP, wipe data, cache, dalvik cache, and wipe system. Yes, wipe system. If you don't have CWM or TWRP, the try using the default recovery and wiping data and cache. If you don't know how to boot into recovery mode, hold the volume UP button, the POWER button, and the HOME button until you see blue text in the top right screen, then let go. when the text disappears, hold that button combo again until you see the android with an open chest. Then proceed to flash back to stock with Odin. This will ONLY work with Odin. I don't think it matters which version of Odin you use. You CANNOT install this straight from system recovery or Clockworkmod, or TWRP. I hope Sprint GS3 owners are happy with this. :3
I am in no way affiliated with Samsung. I am just providing a mirror for those of you stuck with really slow downloads because people want to make money with ads. I have played no part in making this software, i have not tampered or edited it in no way at all. This is literally stock Android 4.3 for the Sprint Galaxy S3. I also am providing the files for Odin and the Samsung drivers because people have trouble finding both of those files. they are not mine.
Aucun commentaire:
Enregistrer un commentaire