Hi guys and girls :) Ok well i've been lurking around on these forums for some time now. Recently I rooted my Nexus 5 and I must say I love it! I'm aiming to make this thread somewhat of a one stop for people who have just rooted or are considering rooting to see what is possible once you root your phone!
Alright so first things first, before you go any further you are going to need:
A rooted Nexus 5!
A fair amount of time.
if you are unsure of how to go about doing this please read through this thread made by the wonderful Chromium_:
http://forum.xda-developers.com/show....php?t=2507905
OK, so from this point on i'm going to assume you have all the requisites you need so lets get into it shall we :D
Block adverts while browsing the web.
So i'm pretty sure that most of us have been blocking those frustrating pop ups and banner adverts while browsing the web on our PCs or Macs for years now right? (Yes, I am looking at you Mr. 888 Poker! :p) But for some reason this is not possible to do on our phones. Not anymore! With your rooted phone you can install the superb adaway and wave those adverts goodbye! :)
Adaway is not however available from the playstore. Don't fear though you can get it here!
http://forum.xda-developers.com/show....php?t=2190753
NB: If for some reason you are not currently blocking ads on your PC or Mac. I recommend the add on - adblockplus.
https://adblockplus.org
Install custom Lockrings, softkeys and more.
Bored of the standard android lockscreen? Don't want to have to mess around with apps such as widgetlocker which often prove to be quite unstable at times? Now you don't have to!
Check out this thread created by matthew0776
http://forum.xda-developers.com/show....php?t=2514238
With the files included in that thread you can have whatever look you could possibly want! As the thread states however, in order to flash them on your device you will need the application ZipThemer.
ZipThemer is a simple enough application to use and is available from the playstore.
https://play.google.com/store/apps/d...wood.zipthemer
In order to use ZipThemer the steps are as follows:
1) Open the ZipThemer application and press Update Edify, you will find this in the drop down menu which appears when you press the 3 dots in the top corner of the right hand side of the screen.
2) Once you press Update Edify you should be greeted with this screen:
3) Press 'Browse'
4) Select the firmware file you are currently using. It could be called, for example, pa_hammerhead-4.0-BETA6-20140217.zip
5) Press 'Configure' A message at the bottom of the screen should pop up at this point which says 'success'.
6) Press the back key once. You should end up at this screen:
7) Once at the screen above press '+Theme' You should then be presented with this screen:
8) Press the green back arrow on the screen above and browse to the location of your lockring/sofkey .zip file you downloaded and placed on your device earlier.
9) Press 'Build It!' and make sure you select the option to make a backup/undo so you can always switch back to stock easily or if there is any issues.
10) Boot device into recovery (CWM or TWRP) Select install Zip from SD card and install it! You will find your file in the root of your SD card for easy access.
ZipThemer not working? Don't worry all hope is not lost! The method above works for the vast majority but if you are one of the unfortunate few there is a solution!
Follow the steps above as usual but when you get to step #4 (Browse for firmware file) Select this file:
http://d-h.st/CgG
Instead of whatever firmware file you are currently running on your device.
Again all credit goes to matthew0776 here. I have simply tried to rephrase the instructions he provided in the thread here:
http://forum.xda-developers.com/show...76182028558105
To make them easier to understand :)
Change your boot animation.
Alright so did you know now that you've rooted your phone you can change the boot animation to whatever you like? Well you can! And below i'm going to try my best to explain how.
Ok, now there are a few ways to do this. Personally I like to do things manually however so that's the way i'm going to demonstrate here. If however you don't fancy doing the legwork yourself though (and don't mind paying a small sum) I am aware of a option in the awesome ROM Toolbox pro which does pretty much the same thing. You can get ROM Toolbox pro from the playstore here:
https://play.google.com/store/apps/d...rty.toolboxpro
So, you've decided to stick with me then?! Alright cool, well here is how to do it the good old fashioned way then :)
You will need:
Root Explorer: https://play.google.com/store/apps/d...e.rootexplorer
A custom boot animation: http://forum.xda-developers.com/show....php?t=2577081 (Thanks to thor6577)
1) Open Root Explorer and navigate your way to: system/media.
2) Here you will find a file called bootanimation.zip Select this file (press the tick to the right of it) and rename it. To do this press the 3 dots in the top corner of the right hand side of the screen once you have selected it and press 'Rename' You may be greeted with a warning at this stage asking if you wish to change the file system from read-only to read-write the answer is YES.
3) Rename the file to bottanimation.zip1 . This is essentially making a backup :)
4) Browse to wherever you have saved your new custom boot animation and copy it over to this directory (system/media)
NOTE: Your custom boot animation MUST BE called bootanimation.zip or it will not work.
5) Reboot and enjoy :)
Change your screen resolution.
The Nexus 5 has absolutely gorgeous 5" display but in my opinion it does not make the most of it out the box! With a rooted phone however you can change the LCD density of the screen to whatever you like!
In simple terms changing the density effects how large icons and widgets will appear on your screen. This means the lower the density the more you can fit on one screen :)
Changing the screen density on a rooted phone is an incredibly simple Build.prop tweak. Certain custom ROMs come with this feature already nicely packaged into the ROM for example the ROM I am using AOSB 1.3.1 does.
http://forum.xda-developers.com/show....php?t=2615590
But, if your ROM doesn't or you have decided to stay on stock don't worry :) To change you LCD Density follow the steps below:
1) Open Root Explorer and navigate your way to system.
2) Select build.prop (Press the blue tick)
3) Click on the three dots on the top right of the screen and select 'Open in Text Editor' You may be greeted with a prompt here which 'WARNING' file system read-only, switch to read-write? (I'm paraphrasing) The answer is of course YES.
4) Find the entry ro.sf.LCD_density.
5) Change the number directly after the '=' to what you want the screen density to be. You can go anywhere from 300 - 480 before apps such as the Playstore start to break. Personally I use 340 dpi and I think its perfect, its all personal preference though :)
6) Press the three bars in the top right corner and select save changes.
7) Reboot your phone and enjoy :)
For more information on LCD density and discussion please check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517311
Thats it for now everyone! Hope this thread is of some use, I plan to keep updating it when I can however and to add some information on Xposed Framework aswell as status bar modifications and more when I can.
I will also add videos if there is demand for all the guides I have tried to simplify here. If i've not given credit to anyone please forgive me! I have tried my best but mistakes do happen, please just drop me a message and ill be sure to add you asap, also if you have any requests for how to do things please don't hesitate to ask and ill try my best for you. Goodnight for now! And GOOD LUCK!:) :) :)
Alright so first things first, before you go any further you are going to need:
A rooted Nexus 5!
A fair amount of time.
if you are unsure of how to go about doing this please read through this thread made by the wonderful Chromium_:
http://forum.xda-developers.com/show....php?t=2507905
OK, so from this point on i'm going to assume you have all the requisites you need so lets get into it shall we :D
Block adverts while browsing the web.
So i'm pretty sure that most of us have been blocking those frustrating pop ups and banner adverts while browsing the web on our PCs or Macs for years now right? (Yes, I am looking at you Mr. 888 Poker! :p) But for some reason this is not possible to do on our phones. Not anymore! With your rooted phone you can install the superb adaway and wave those adverts goodbye! :)
Adaway is not however available from the playstore. Don't fear though you can get it here!
http://forum.xda-developers.com/show....php?t=2190753
NB: If for some reason you are not currently blocking ads on your PC or Mac. I recommend the add on - adblockplus.
https://adblockplus.org
Install custom Lockrings, softkeys and more.
Bored of the standard android lockscreen? Don't want to have to mess around with apps such as widgetlocker which often prove to be quite unstable at times? Now you don't have to!
Check out this thread created by matthew0776
http://forum.xda-developers.com/show....php?t=2514238
With the files included in that thread you can have whatever look you could possibly want! As the thread states however, in order to flash them on your device you will need the application ZipThemer.
ZipThemer is a simple enough application to use and is available from the playstore.
https://play.google.com/store/apps/d...wood.zipthemer
In order to use ZipThemer the steps are as follows:
1) Open the ZipThemer application and press Update Edify, you will find this in the drop down menu which appears when you press the 3 dots in the top corner of the right hand side of the screen.
2) Once you press Update Edify you should be greeted with this screen:
3) Press 'Browse'
4) Select the firmware file you are currently using. It could be called, for example, pa_hammerhead-4.0-BETA6-20140217.zip
5) Press 'Configure' A message at the bottom of the screen should pop up at this point which says 'success'.
6) Press the back key once. You should end up at this screen:
7) Once at the screen above press '+Theme' You should then be presented with this screen:
8) Press the green back arrow on the screen above and browse to the location of your lockring/sofkey .zip file you downloaded and placed on your device earlier.
9) Press 'Build It!' and make sure you select the option to make a backup/undo so you can always switch back to stock easily or if there is any issues.
10) Boot device into recovery (CWM or TWRP) Select install Zip from SD card and install it! You will find your file in the root of your SD card for easy access.
ZipThemer not working? Don't worry all hope is not lost! The method above works for the vast majority but if you are one of the unfortunate few there is a solution!
Follow the steps above as usual but when you get to step #4 (Browse for firmware file) Select this file:
http://d-h.st/CgG
Instead of whatever firmware file you are currently running on your device.
Again all credit goes to matthew0776 here. I have simply tried to rephrase the instructions he provided in the thread here:
http://forum.xda-developers.com/show...76182028558105
To make them easier to understand :)
Change your boot animation.
Alright so did you know now that you've rooted your phone you can change the boot animation to whatever you like? Well you can! And below i'm going to try my best to explain how.
Ok, now there are a few ways to do this. Personally I like to do things manually however so that's the way i'm going to demonstrate here. If however you don't fancy doing the legwork yourself though (and don't mind paying a small sum) I am aware of a option in the awesome ROM Toolbox pro which does pretty much the same thing. You can get ROM Toolbox pro from the playstore here:
https://play.google.com/store/apps/d...rty.toolboxpro
So, you've decided to stick with me then?! Alright cool, well here is how to do it the good old fashioned way then :)
You will need:
Root Explorer: https://play.google.com/store/apps/d...e.rootexplorer
A custom boot animation: http://forum.xda-developers.com/show....php?t=2577081 (Thanks to thor6577)
1) Open Root Explorer and navigate your way to: system/media.
2) Here you will find a file called bootanimation.zip Select this file (press the tick to the right of it) and rename it. To do this press the 3 dots in the top corner of the right hand side of the screen once you have selected it and press 'Rename' You may be greeted with a warning at this stage asking if you wish to change the file system from read-only to read-write the answer is YES.
3) Rename the file to bottanimation.zip1 . This is essentially making a backup :)
4) Browse to wherever you have saved your new custom boot animation and copy it over to this directory (system/media)
NOTE: Your custom boot animation MUST BE called bootanimation.zip or it will not work.
5) Reboot and enjoy :)
Change your screen resolution.
The Nexus 5 has absolutely gorgeous 5" display but in my opinion it does not make the most of it out the box! With a rooted phone however you can change the LCD density of the screen to whatever you like!
In simple terms changing the density effects how large icons and widgets will appear on your screen. This means the lower the density the more you can fit on one screen :)
Changing the screen density on a rooted phone is an incredibly simple Build.prop tweak. Certain custom ROMs come with this feature already nicely packaged into the ROM for example the ROM I am using AOSB 1.3.1 does.
http://forum.xda-developers.com/show....php?t=2615590
But, if your ROM doesn't or you have decided to stay on stock don't worry :) To change you LCD Density follow the steps below:
1) Open Root Explorer and navigate your way to system.
2) Select build.prop (Press the blue tick)
3) Click on the three dots on the top right of the screen and select 'Open in Text Editor' You may be greeted with a prompt here which 'WARNING' file system read-only, switch to read-write? (I'm paraphrasing) The answer is of course YES.
4) Find the entry ro.sf.LCD_density.
5) Change the number directly after the '=' to what you want the screen density to be. You can go anywhere from 300 - 480 before apps such as the Playstore start to break. Personally I use 340 dpi and I think its perfect, its all personal preference though :)
6) Press the three bars in the top right corner and select save changes.
7) Reboot your phone and enjoy :)
For more information on LCD density and discussion please check out this thread:
http://forum.xda-developers.com/showthread.php?t=2517311
Thats it for now everyone! Hope this thread is of some use, I plan to keep updating it when I can however and to add some information on Xposed Framework aswell as status bar modifications and more when I can.
I will also add videos if there is demand for all the guides I have tried to simplify here. If i've not given credit to anyone please forgive me! I have tried my best but mistakes do happen, please just drop me a message and ill be sure to add you asap, also if you have any requests for how to do things please don't hesitate to ask and ill try my best for you. Goodnight for now! And GOOD LUCK!:) :) :)
Aucun commentaire:
Enregistrer un commentaire