(For reference, I have a MAG2GA FW v6 dated 10/2012) -- yes, I have access to CWM and ADB
Had verygreen's CM11 (1-18, eMMC install) on my HD+ and it was working without any major issues -- came back home one day and the screen was frozen. Did a power + N button reboot, and now the CM logo on boot spins incredibly slowly (completely hanging at several points). After a few minutes it will either bootloop or get into CM11 -- if it does make it into CM11, the system will be very unresponsive and eventually reboot on its own [no matter what I select].
Booted into eMMC CWM 6.0.4.6, formatted /system, /data and /cache and reinstalled CM11 1-18 + PA GAPPS. On reboot, I see the exact same behavior (slow/freezing CM logo, eventual bootloop). When it does sometimes make it back into CM, I see my widgets / wallpaper for a brief moment before it bootloops again, implying that my format/wipe in CWM did nothing...?
I then booted into bokbokan's CM10.1 I had on a MicroSD lying around -- I installed the eMMC brick check app from there (which checked out fine, including a test on the full 16gb). I'm trying to do an ADB push now of leapinlar's NookHDplus-factory-2.2.0-plain-stock.zip so I can install it and try to get it replaced under warranty but it either [tried both SD-based CWM and eMMC-based CWM] :
1 - hangs forever (implying some issue with my internal storage)
2 - says transfer complete, but when I navigate to /sdcard/0/ I don't see it
3 - the one occasion I did manage to transfer stock back over and the system could actually see it, I got a '"Failed to retouch '/system/lib/libemoji.so'" error when installing (and yes, I'm formatting /system every time)
In additional, the eMMC CWM behaves very erratically, sometimes taking over a minute to navigate through folders or respond to a volume button click. Pretty sure my internal storage is damaged somehow.
It seems like no matter what I do in CWM, my HD+ continues to try to reboot back into my old CM11 installation. Any thoughts or ideas on what I can do next?
Had verygreen's CM11 (1-18, eMMC install) on my HD+ and it was working without any major issues -- came back home one day and the screen was frozen. Did a power + N button reboot, and now the CM logo on boot spins incredibly slowly (completely hanging at several points). After a few minutes it will either bootloop or get into CM11 -- if it does make it into CM11, the system will be very unresponsive and eventually reboot on its own [no matter what I select].
Booted into eMMC CWM 6.0.4.6, formatted /system, /data and /cache and reinstalled CM11 1-18 + PA GAPPS. On reboot, I see the exact same behavior (slow/freezing CM logo, eventual bootloop). When it does sometimes make it back into CM, I see my widgets / wallpaper for a brief moment before it bootloops again, implying that my format/wipe in CWM did nothing...?
I then booted into bokbokan's CM10.1 I had on a MicroSD lying around -- I installed the eMMC brick check app from there (which checked out fine, including a test on the full 16gb). I'm trying to do an ADB push now of leapinlar's NookHDplus-factory-2.2.0-plain-stock.zip so I can install it and try to get it replaced under warranty but it either [tried both SD-based CWM and eMMC-based CWM] :
1 - hangs forever (implying some issue with my internal storage)
2 - says transfer complete, but when I navigate to /sdcard/0/ I don't see it
3 - the one occasion I did manage to transfer stock back over and the system could actually see it, I got a '"Failed to retouch '/system/lib/libemoji.so'" error when installing (and yes, I'm formatting /system every time)
In additional, the eMMC CWM behaves very erratically, sometimes taking over a minute to navigate through folders or respond to a volume button click. Pretty sure my internal storage is damaged somehow.
It seems like no matter what I do in CWM, my HD+ continues to try to reboot back into my old CM11 installation. Any thoughts or ideas on what I can do next?
Aucun commentaire:
Enregistrer un commentaire