I bring this very good way to install a. KDZ (Rom stock) at LG G Pad, tested by me.
I do not take responsibility for the terminal to be kept as a brick, a billet, etc..
1: We downloaded the ROM for our team here: Firmware_LG_G_Pad
2: We got the LG mobile support tool and install it from here: http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
3: Download I install LG drivers if you have not already installed: Flash_Tool.1.0.54.rar - 3.35 MB
4: We lower the Install FlashTool (R&D Test Tool): Flash_Tool.1.0.54.rar - 3.35 MB
5: Unzip and run the UpTestEX.exe FlashTool.
6: In FlashTool window select:
- Select Type = 3GQCT.
- PhoneMode = DIAG.
- Select kdz file = Select the KDZ.
- Now Click "Normal web upgrade test".
- Now leave another window, you give it to "Start Upgrade".
- It will start to load the program.
- You wait a few seconds and another window will ask country and language.
- Country = Republic of Korea.
- Language = Inglés.
We left well, since we are Spanish, which is not to put the your country.
- To register the new language you press, Clear phone Software update Registry.
- And I will say that the record is complete.
- Press Ok.
- And start the flashing process.
7: I miss all this without connecting the tablet, the program tells me clearly that I normally do and connect without being in (ModoDowload) but to connect to the program detects it, has to be in LG software then clikais back into the program and you will recognize it, began to extract the KDZ and when you start Flash, one entered the tablet in ModoDowload after reboot everything perfect or bootloop or anything, all my settings such as tapeworms, but with the new version, but I recommend getting HardReset or factory reset.
8: How to do a hard reset after flashing (recommended)
1 - Shut off the tablet.
2 - with tight-volume button and the kindle Let the button pressed on with less volume.
Ye let go of the button again and, - 3 When the LG logo comes up, Put down the power button (leaving Tight-blasting time button), nothing more release, you apretáis the volume knob more and ignition time ignition and leaving the least volume and the tightest volume at once. Until the hard reset menu comes up.
4 - hard reset menu, apretáis the power button to confirm you 3 times. Restart in android and it will always do the wipes. Restarts one and you're set up everything again.
EYE, the terminal end and restart, but the pc does not open ended process, DO NOT DISCONNECT USB CABLE UNTIL END THE PROCESS IN THE PC.
Uploading new video from the beginning of the flash.
I do not take responsibility for the terminal to be kept as a brick, a billet, etc..
1: We downloaded the ROM for our team here: Firmware_LG_G_Pad
2: We got the LG mobile support tool and install it from here: http://csmg.lgmobile.com:9002/client...2CAppSetup.exe
3: Download I install LG drivers if you have not already installed: Flash_Tool.1.0.54.rar - 3.35 MB
4: We lower the Install FlashTool (R&D Test Tool): Flash_Tool.1.0.54.rar - 3.35 MB
5: Unzip and run the UpTestEX.exe FlashTool.
6: In FlashTool window select:
- Select Type = 3GQCT.
- PhoneMode = DIAG.
- Select kdz file = Select the KDZ.
- Now Click "Normal web upgrade test".
- Now leave another window, you give it to "Start Upgrade".
- It will start to load the program.
- You wait a few seconds and another window will ask country and language.
- Country = Republic of Korea.
- Language = Inglés.
We left well, since we are Spanish, which is not to put the your country.
- To register the new language you press, Clear phone Software update Registry.
- And I will say that the record is complete.
- Press Ok.
- And start the flashing process.
7: I miss all this without connecting the tablet, the program tells me clearly that I normally do and connect without being in (ModoDowload) but to connect to the program detects it, has to be in LG software then clikais back into the program and you will recognize it, began to extract the KDZ and when you start Flash, one entered the tablet in ModoDowload after reboot everything perfect or bootloop or anything, all my settings such as tapeworms, but with the new version, but I recommend getting HardReset or factory reset.
8: How to do a hard reset after flashing (recommended)
1 - Shut off the tablet.
2 - with tight-volume button and the kindle Let the button pressed on with less volume.
Ye let go of the button again and, - 3 When the LG logo comes up, Put down the power button (leaving Tight-blasting time button), nothing more release, you apretáis the volume knob more and ignition time ignition and leaving the least volume and the tightest volume at once. Until the hard reset menu comes up.
4 - hard reset menu, apretáis the power button to confirm you 3 times. Restart in android and it will always do the wipes. Restarts one and you're set up everything again.
EYE, the terminal end and restart, but the pc does not open ended process, DO NOT DISCONNECT USB CABLE UNTIL END THE PROCESS IN THE PC.
Versions available for our Tablet
Uploading new video from the beginning of the flash.
Aucun commentaire:
Enregistrer un commentaire