[Q] Stuck In ClockWorkMod topic

Like others, I foolishly accepted the OTA. Now no matter what I do, phone will only boot into CWM v.6.0.0.4. The bitch is, I can't access download mode, or adb. Any help would be graciously welcomed.:(

Flashing ClockWorkmod recovery with Rom Manager topic

I am trying to install CM 10.2 stable on my Nook Color. It has software version 1.4.1. I am following the steps mentioned here: http://wiki.cyanogenmod.org/w/Install_CM_for_encore

As explained in steps, I used uNooter mentioned in wiki and now I have the root access.

But when I open Rom Manager, under Flash ClockworkMod Recovery, I can't find Barnes & Noble Nook Color in the list. So what to do? Why the list does not contain Nook Color? Any help regarding this appreciated.

[Q] Problems installing ClockWorkMod Recovery. topic

I cant install ClockworkMod Recovery on my Asus TF700T, i have followed the guide, and tried with both ver. 6.0.4.4 and 6.0.4.7, and both give error "cannot load recovery".
My tablet is rooted, and running android 4.2.1, version number is 10.6.1.14.8, usb debugging is on, and all drivers should be installed on my pc, so i dont know what the problem is ???
Plz help, so i can get another rom, because it is really slow and "laggy" with the stock ROM :(

I'm new in here, so sorry if there is another thread with this question, i have tried to look around in the forum.

How to make CLOCKWORKMOD (CWM) Recovery & Backup any android mobile with MTK topic

We often try new stuffs on our Android device...But sometimes we may get into material which is not meant for our device and it may result in BRICKING of your phone...So here is the process which would help you get rid of any such problem as after doing this process you would have a backup saved of your ROM and can flash it anytime even if you had bricked your device...

This process will show you how to make CWM recovery of your android phone and also how to backup you Stock/Custom Rom so that even if you brick your mobile you have a backup ready to pump in life again into it...

Before starting..
1. Make sure you have the drivers installed for your Android Device..This whole process depends on it!!

You will need below softwares on your windows to start with this process.

1. SP FLASH TOOL V 3.1224
2. MTKDroid Tools V2.4.8

STEP 1
>>Enable USB DEBUGGING on your devise.
>>Connect to computer via USB cable
>>Open MTK DROID root tools.exe and it will show your device settings



STEP 2
>> Click on "Blocks Map" which should show something like below;



STEP 3
>> Click "Create Scatter File" and save it. Do not change name or anything. By default, the MTK droid Tools will go to save inside the extracted MTKdroid folder. Thats fine.

STEP 4
>>Open SP flasher
>> Click "scatter-loading" and select the scatter file you saved in step 3



After selecting....

STEP 5
>> click "Read Back" tab on SP Flasher


STEP 6
>>click "Add" button


A new entry will appear (see below)


STEP 7
>>Double Click "N/A" entry
This will save the your current ROM file. Choose a location to save...
TIP: "ROM_" should be in start of the name.. Eg: ROM_myrom"




After you click save, below box will open. choose"Hex" as below..and keep the window open


STEP 8
>> Open the Scatter file you created in STEP 3. You can use any text editor. Search for the term "CACHE" in the document; which will have a numbering to it like 0x227e800. Copy this number from your scatter file (In some case it shows linear & Physical...Copy linear number)


PASTE the number into the window for "Length" entry and click OK.


STEP 9
>> Disconnect your device from the computer
>> Switch the device off.
>> Click "Read Back" on the SP flasher window (see below)
>> Quickly connect the switched off device to computer via USB cable NOW!

TIP: This will start reading your ROM and might take some time. So be patient. When process is complete, remove your phone from the computer and turn it on with USB debugging enabled. All the while, keep SP Flasher Window open as it was (DO NOT CLOSE).

STEP 10
>> Open MTK Droid Root & tools app and choose "root, Backup, recovery" TAB as below


>> Click on "To process file ROM_from flash tool" button and it will open your directory..



>> Choose the "ROM_......" file you saved in STEP 7 >> Click open.


This will start processing the ROM file for installing clockworkMOD. A notice will flash asking to make CWM recovery.. Click Yes!


You will see messages popping up in the right side pannel of MTK Droid Root & tools app. The process will take around 5 minutes to finish. Wait until finish. Keep as it is.

IMPORTANT: This will save the "Scatter-Loading" & Custom recovery File you will need in STEP 12 & 14 It will be in Droid Root & Tools folder/Backup.


STEP 11
>> GO back to SP Flasher window
>> Click "Download" TAB


STEP 12
>> Click "Scatter-Loading" and select the Scatter file created by MTK Droid Root & Tools in Step 10. (should be in Droid Root & Tools/Backup folder) Do not use the scatter file made in Step 1)


STEP 13

>> Deselect ALL checkboxes, except for the RECOVERY one, double click the RECOVERY entry


STEP 14
>> Select the recovery image
>> Click "open".
Note: This is the file saved from Step 10.

Now everything is set up for flashing...

STEP 15
>> Disconnect devise from Computer
>> Switch off device
>> Click on "Download" TAB in SP flasher. (this will start searching for device to flash)
>> Connect your devise switched off!


Warning like below will be seen. But you are flashing only the recovery... (good thing is you also got a back up of your rom!!)



ENJOY!
Please DONATE or HIT THANKS if you liked my post..
Feel free to post your querries...

[Q] help!!! stock in clockworkmod recovery can;t reboot topic

i'm trying to flash my google nexus 7 2012 with the custo rom bs harmony_grouper 1.11.14zip now when in installing this message appears set_meadata_recursive: some changes failed E:error in sdcard/obb/bs_harmony_grouper_1.11.14.zip (status 7) installation aborted pls help me guys!!!!!:(:(

Status 7 error when flashing rom in clockworkmod recovery or TWRP topic

This has been happening to me ever sense I flashed my first ROM on my Note 8.0...I'm not new to this I just never encountered this type of error before... This error happens no matter what rom I tried to flash...thanks in advance everyone.

Sent from my GT-N5110 using XDA Premium 4 mobile app

[Q] Clockworkmod Recovery Installation Error topic

Hello, this is my first thread ever on xda so if I have posted in the wrong section I'm sorry.

I've been working on unlocking my bootloader and rooting my phone all day and I finally achieved both of these things.
I have an HTC Thunderbolt. I tried installing clockworkmod recovery using the MK208 4.0.4 app from the Play Store, but I get an error every time I click "Install Recovery".

The Error looks like this:

Script output

Warnings-Errors:
0+1 records in
1+0 records out
512 bytes (512B) copied, 0.000153 seconds,
3.2MB/s
note permited! (Yes, permitted is spelled wrong in the error message, that is not my mistake.)

I have no idea what to make of this, I have SuperUser installed and have allowed SU permissions for Clockworkmod and I have busybox installed as well.

Can anyone help me? Thanks

[ROOT] Root & ClockWorkMod LG G Tab 8.3 (V500) Mac OSX topic

Toolkit LG G PAD 8.3 for Mac OSX





http://www.mediafire.com/download/gp...it+01.2014.zip

[Q] Sensation XL Runnymead + ClockworkMod Recovery topic

I just bought a preowned HTC Sensation XL with Cyanogen Runnymead Android 4.2.2 Jellybean operating system and it seems the Cyanogen system is interfering with some of the phones functions.
1. Some outgoing phone calls suffer from a loud whistling noise.
2. When turning off the phone and plugging in a charger.... the phone reawakes, stops charging and implements clockworkmod recovery menu, of which I have no understanding.
3. The phone is unable to recognise the contact list from a sim card.

How can I simply and easily restore the phone safely to stock Android 2.3.5?