[Q] Motorola Moto G Fastboot drivers topic

Hello.

I own a Moto G (GSM) running CyanogenMod 11 rooted with TWRP recovery and the bootloader is unlocked. I have been trying to go back to the stock firmware using this guide: http://forum.xda-developers.com/show....php?t=2542219 but I have a problem. The adb drivers for my device work fine when I am in the system or in the recovery, but don't work in the bootloader. I am able to type "adb reboot bootloader" when I'm in the system/recovery and it will follow the command, but once I get into the bootloader it stops. When I type "adb devices" a line saying "List of devices attached" comes up with nothing underneath it.

I am completely lost and would greatly appreciate any help. Also I am new to XDA.

Thank you

[GUIDE] Motorola Service Menu topic

This is a short guide how to access the Motorola's service menu (Custom Quality Assurance).
I've checked around and it seems no one have had shared this.

1.Open your dialer
2.Enter *#*#2486#*#*
3.There are 2 options
-> Start CQA on menu mode
-> Start CQA in sequence mode
Menu mode is just a manual selection of given test
Sequence mode just runs all tests in a row.

## Note 1 ##
Entering into the service menu will disable automatic display brightness, just enable it back in Settings/Display if you are using it.

## Note 2 ##
In Sequence mode, the back key won't work, use Vol up/down to skip to the next test.

[Q] Motorola Defy getting stuck at boot menu topic

Hello,

I successfully installed cyanogenmod 7.2 on my Motorola Defy MB525 using the instructions from the cyanogenmod wiki "Install CM for jordan" (can't post link yet).

After a while, I wanted to install gapps, so I installed it from Bootmenu. After this, the phone was always booting to boot menu and I didn't know how to make it boot into the system, so I changed the "Boot" option default to something like "Normal", I think.

Now when starting the phone, all I see is the Google logo which stays there indefinitely.

I can still boot to BootMenu and tried a number of times to wipe data/factory reset, wipe cache, wipe dalvik cache, and re-install the cyanogenmod7.2 zip, but it still can't get out of the infinite loop.

I found out that a posible solution would be to flash an image with RSD Lite, but it seems kind of tricky and I would rather leave it as a last resort.

Any ideas?

Thanks

[Q] complete image of a motorola xoom topic

This is my first post.
Is there a way that I can create a complete image of a motorola xoom and a complete image of a motorola xoom 2 and then copy that image to another device of the same type? We have about 40 of each kind and when I have to reinstall I have to go to each of the 4 fastboot processes in order to rebuild each device when someone messes up on of them. The Xooms are not rooted and are not assigned to any service providers. MZ604 and MZ607. I was thinking along the lines of when I would create an image of a computer and image another computer. If this is not possible how could I just copy all the apps from one device to another device of the same kind.
I know a little about fastboot and RSD lite.

[Q] LG or Motorola? topic

Which watch do u want?

Fake Motorola update signature to install 4.2.2 topic

The purpose of the thread is three-fold:

1) understand why a phone with 4.4 from the factory (not 4.4.2) cannot be downgraded by RSD Lite or motoboot to 4.2.2 with an exception that says "downgraded security" or similar
2) figure out if there is a way to fake whatever is detected during flashing to make it think it is receiving an upgrade and not a downgrade
3) figure out whether it is possible to modify the system
img from the 4.4 or 4.4.2 update and to inject root on a locked bootloader

Gesendet von meinem Nexus 4 mit Tapatalk

[Q] Motorola defy black screen with white led topic

hi all i bought defy about a year ago as a second phone from ebay with cm7 installed.last week i purchase another phone and give my 7 years old daughter. however i reset everything and phone turn old version blur mod then stuck on m logo i download rom and sort the problem.

real problem starts now i try to install cm 9 download all required files wiped the phone and install the rom however it didn't restart stuck on black screen and only white led when connected with usb also didn't connect or recognized by rds lite.I found tread battery wake up from i think was ''mggrager'' or something else finally rds recognized the phone and install another sbf but still stays same as black screen and white.i read so many threats on this side or others and each i installed custom roms without clearing cache

battery replaced with replacement battery also original
all drivers installed
it doesn't respond any buttons or usb connection
rds only with battery jump

please help what to do

[Help] Motorola XT 912 Signal topic

Hi I root my phone Motorola XT912 and have installed the latest rom of cyanogenmod (cm-11-20140222-NIGHT-spyder), go all perfect messages receipt, flames all but I can not send SMS..

Note: I can not access the configuration of a NPC!

Someone happened this? Any idea that can be? Thanks I hope your help ..!

HELP!!!!! motorola xt910 hardlock topic

please help me, i just got a Motorola xt910 hardlocked, i guess someone before i receive the phone failed to put the unlock code more than 10 times is there any solution to unlock it??? i tried to buy unlock code from online websites but none worked, the phone doesn't ask for the code when i insert the simcard, i have to dial #073887* to ask for the code, once i put the code it says unsuccessful. flashed will retail ROM and nothing, flashed with original carrier ROM and nothing. is there any other trick or solution???

[Help] Motorola XT 912 Signal topic

Hi I root my phone Motorola XT912 and have installed the latest rom of cyanogenmod (cm-11-20140222-NIGHT-spyder), go all perfect messages receipt, flames all but I can not send SMS..

Note: I can not access the configuration of a NPC!

Someone happened this? Any idea that can be? Thanks I hope your help ..!

[Q] Trying to root Motorola XT910, noob questions topic

Hello folks,

I am a noob in playing around with Android, although I am a long time lurker here, never dared to post anything, just because I don't know even basics.

That said, my XT910 was driving me nuts and many a times I considered throwing it in trash, but having paid ~0 hard cash, I did not. Lately, it crawled, rebooted randomly, hanging all of a sudden in the middle of the call was pretty commonplace. Factory reset did not help. The wi-fi connectivity issue has been there since day one. Where my another HTC One X connects like breeze and downloads whatever needed, XT910 still looks for any wi-fi connections.

I decided to root, hoping to tweak the device so that I can use it for at least another year or so. I followed the thread at http://forum.xda-developers.com/show....php?t=2257137 Very good thread, pretty easy to understand. I did encounter few issues and thats where this post comes in.

While this post shows screenshots for remote storage, I never got this option, but I added it in. I never got an option to enter the details of the location i.e. image 4 and 5 of the post. Still everything seemed to work as expected.

Majority of the on-screen prompts went as expected, they were not same. Considering this post, image 2, there is a good difference in what I saw and what the screenshot mentioned. My screenshot attached below.



So the questions I have, whats in the red boxes.
The first big red box is not in the original screenshot, but I got it.
The last line of USB disconnect, I never got, neither my phone vibrated in the whole process as mentioned in big red box.
Since I am noob, I can not decipher this, and with posts less than 10, I can not post in that thread. I will be really thankful if someone expert can flash some light on this.

Is my phone really rooted now?
(P.S. - Don't ask me for phone screenshots, they never work on my phone, with power and volume down button pressed together.)

Thanks a lot in advance.

Motorola Razr not turning on topic

The battery of my phone died some months back and recently I bought a new battery. The phone used to turn on with the earlier battery but never used to last without charger. Now I got the new battery installed it doesn't turn on. When I plug it in the wall charger, the motorola logo appears and the battery sign appears with 0-5% battery everytime and it vanishes in 5 seconds.
I don't have a factory cable.
Is there any other way I can turn my phone on?

[Q] Motorola Moto X General specs topic

General

Product Type Smartphone
Width 2.57 in
Depth 0.41 in
Height 5.09 in
Weight 4.59 oz
Cellular

Service Provider AT&T
Operating System Android
Processor

Processor Core Qty Dual Core
Display

Diagonal Size 4.7 in

[Q] Motorola Mobility apps on CyanogenMod topic

Moto X and G stock firmwares are probably the most AOSP-like ones, yet it's not perfect AOSP, like Nexus' one. However, unlike Samsung, LG, HTC and other manufacturers, Motorola apps like gallery, camera, bootanimation-changing service etc. are great - fun and sometimes even useful. I thought that because they are in Play Store, they could be downloaded after flashing CyanogenMod 11. However it shows that device is not supported. As far as I know Store recognizes devices by build.prop file, so I pulled build.prop files from both stock and CM11 (below) and noticed differences in "product.name", "product.device" and similar fields. The I tried pasting some stock values into CM file, but after pushing it to /system and rebooting it resulted in soft-brick.

My question is - is it possible to modify CM system files somehow (either place in flashable zip or copy while system is running and reboot), so that Motorola apps (especially camera and gallery with it's nice interface and HDR) would work on CM? I also pulled whole stock /system partition to computer and got list of framework files (screenshots attached below - I can also upload them if it's needed) - if proper modifying of build.prop is not enough, which of that files I have to push into CM partition to make Motorola apps downloadable from Store and fully working?

Stock build.prop

Code:

---

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KLB20.9-1.10-1.9
ro.build.display.id=KLB20.9-1.10-1.9
ro.build.version.incremental=5
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Thu Dec 19 04:32:04 CST 2013
ro.build.date.utc=1387449124
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=ilclbld32
ro.build.tags=release-keys
ro.product.model=XT1032
ro.product.brand=motorola
ro.product.name=falcon_retgb
ro.product.device=falcon_umts
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=falcon_umts
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=falcon_retgb-user 4.4.2 KLB20.9-1.10-1.9 5 release-keys
ro.build.fingerprint=motorola/falcon_retgb/falcon_umts:4.4.2/KLB20.9-1.10-1.9/5:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/moto/falcon_umts/system.prop
#
#
# system.prop for msm8226
#

# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false

#
# system props for the cne module
#
persist.cne.feature=0


# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1

debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1

persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.decode=true
lpa.use-stagefright=true

#system props for the MM modules

media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
#9273 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491

# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true

#system props for time-services
persist.timed.enable=true

#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608

#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0

# simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.crypto.fuse_sdcard=true

#
#snapdragon value add features
#
# System props for audio
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
persist.audio.fluence.mode=endfire
persist.audio.handset.mic=digital
ro.config.vc_call_vol_steps=7
# FM maximum volume be between 0 and 8192 (0dB)
ro.audio.fm_max_volume=4096

# Enable/disable cabl
ro.qualcomm.cabl=0

# system prop for NFC DT
ro.nfc.port=I2C

#
# system property for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd

#
# system property for Bluetooth HFP version
#
ro.bluetooth.hfp.ver=1.6

#
# system property for Bluetooth SAP support
# Motorola disabled SAP
#
ro.qualcomm.bluetooth.sap=false

# Bluetooth LE power class
qcom.bt.le_dev_pwr_class=1

#property to enable user to access Google WFD settings
persist.debug.wfd.enable=0
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
# Motorola, ams087, 09/24/2013, IKJBMR2-6432 : disable tunnel audio encode
#tunnel.audio.encode = true

# Enable SSR
persist.sys.ssr.restart_level=3
persist.sys.qc.sub.rdump.on=1

# For TCMD debug level
persist.tcmd.log.limit=0

# Disable QCOM net early sockets feature
net.early.sockets=0

# Radio RIL properties
persist.radio.no_wait_for_card=1
persist.radio.call_type=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.dfr_mode_set=1

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.version.full=Blur_Version.174.44.9.falcon_umts.Retail.en.GB
ro.mot.build.customerid=RTGB
ro.mot.build.version.sdk_int=19
ro.product.display=Moto G
ro.build.version.qcom=AU_LINUX_ANDROID_JB_3.2.3.04.03.00.166.006
persist.radio.plmn_name_cmp=1
ro.telephony.default_network=3
ro.com.android.dataroaming=false
ro.config.ringtone=Moto.ogg
ro.config.notification_sound=Moto.ogg
ro.config.alarm_alert=Oxygen.ogg
ro.MAX_HIDDEN_APPS=12
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
ro.usb.mtp=0x2e82
ro.usb.mtp_adb=0x2e76
ro.usb.ptp=0x2e83
ro.usb.ptp_adb=0x2e84
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b
ro.bug2go.magickeys=24,26
persist.sys.qc.sub.rdump.max=0
ro.adb.secure=1
ro.sf.lcd_density=320
keyguard.no_require_sim=true
ro.zygote.capsuid=0
mdc_initial_max_retry=10
persist.radio.apn_delay=5000
drm.service.enabled=true
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.2_r1
ro.carrier=unknown
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x4
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1

---

And CyanogenMod 11 (http://forum.xda-developers.com/show....php?t=2608377) build.prop

Code:

---

# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49H
ro.build.display.id=cm_xt1032-userdebug 4.4.2 KOT49H 893f1e5b41 test-keys
ro.build.version.incremental=893f1e5b41
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Tue Jan 28 00:59:56 CET 2014
ro.build.date.utc=1390867196
ro.build.type=userdebug
ro.build.user=dhacker29
ro.build.host=androidhosting
ro.build.tags=test-keys
ro.product.model=XT1032
ro.product.brand=motorola
ro.product.name=XT1032
ro.product.device=xt1032
ro.product.board=MSM8226
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8226
# ro.build.product is obsolete; use ro.product.device
ro.build.product=xt1032
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=cm_xt1032-userdebug 4.4.2 KOT49H 893f1e5b41 test-keys
ro.build.fingerprint=motorola/falcon_retuglb/falcon_umts:4.3/14.10.0Q3.X-84-16/6:user/release-keys
ro.build.characteristics=default
ro.cm.device=xt1032
# end build properties
#
# from device/motorola/xt1032/system.prop
#
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=

#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-motorola
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.root_access=1
ro.cm.version=11-20140127-UNOFFICIAL-xt1032
ro.modversion=11-20140127-UNOFFICIAL-xt1032
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
ro.cm.display.version=11-20140127-UNOFFICIAL-xt1032
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Argon.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
debug.sf.fb_always_on=1
ro.hdmi.enable=true
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
ro.audio.fm_max_volume=4096
ro.qualcomm.cabl=0
use.voice.path.for.pcm.voip=true
qcom.bt.le_dev_pwr_class=1
ro.qc.sdk.audio.ssr=false
persist.audio.fluence.voicecall=true
ro.qc.sdk.audio.fluencetype=fluence
audio.offload.buffer.size.kb=32
audio.offload.gapless.enabled=true
av.offload.enable=true
ro.usb.mtp=0x2e82
ro.usb.mtp_adb=0x2e76
ro.usb.ptp=0x2e83
ro.usb.ptp_adb=0x2e84
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b
persist.gps.qc_nlp_in_use=0
persist.fuse_sdcard=true
ro.crypto.fuse_sdcard=true
ro.nfc.port=I2C
rild.libpath=/system/vendor/lib/libril-qc-qmi-1.so
ro.opengles.version=196608
ro.sf.lcd_density=320
ro.vendor.extension_library=/system/vendor/lib/libqc-opt.so
debug.egl.hw=1
debug.sf.hw=1
persist.sys.ui.hw=true
debug.composition.type=dyn
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
debug.enabletr=0
mm.enable.smoothstreaming=true
com.qc.hardware=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
ro.bluetooth.hfp.ver=1.6
ro.qualcomm.bluetooth.sap=true
ro.qualcomm.bt.hci_transport=smd
ro.bluetooth.request.master=true
ro.bluetooth.remote.autoconnect=true
lpa.decode=false
tunnel.decode=true
tunnel.audiovideo.decode=true
qcom.hw.aac.encoder=true
af.resampler.quality=255
persist.audio.lowlatency.rec=false
persist.sys.qc.sub.rstrtlvl=3
persist.sys.qc.sub.rdump.on=1
persist.sys.qc.sub.rdump.max=20
ril.subscription.types=NV,RUIM
ro.use_data_netmgrd=true
ro.ril.transmitpower=true
persist.radio.apm_sim_not_pwdn=1
persist.radio.call_type=1
ro.config.vc_call_vol_steps=7
ro.modem.no_wdog_chk=1
persist.timed.enable=true
telephony.lteOnGsmDevice=0
telephony.lteOnCdmaDevice=0
ro.telephony.default_network=3
persist.radio.no_wait_for_card=1
persist.radio.dfr_mode_set=1
ro.mot.build.customerid=RTGB
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt

---

Attached Thumbnails

 


 


 

Lenovo is buying Motorola Mobility from Google topic

TechCrunch has confirmed reports that Lenovo is buying Motorola Mobility from Google. This is the division within Google that the company purchased in 2011 for .5 billion. Motorola Mobility will go to Lenovo for .91 billion.

http://techcrunch.com/2014/01/29/len...y-from-google/


I don't know this is good or bad?
May be lenovo can open atrix source

What Google's sale of Motorola means for us topic

I'm sure you all have heard about Lenovo's acquisition of Motorola this afternoon. And I'm also aware that it's too early to tell what exactly this means for us, and support for our device, but I figured I'd start a thread for us to post in when we learn more. Feel free to share any info or links.

Sent from my Droid Razr M using xda app-developers app

Lenovo bought Motorola for 2.9 billion topic

I thought Google bought Moto three years ago for 12 billion or something. Too bad. Without Google, I doubt there will be another great phone like the Moto X.

Sent from my XT1053 using Tapatalk 2

Google sells Motorola to Lenovo topic

http://googleblog.blogspot.com/2014/...ility.html?m=1
Sent from my MB886 using xda app-developers app

[Q] Motorola Atrix 4G Stuck on Main UNLOCKED Screen topic

Hi guys, I'm a new user here. I've tried to install a new cyanogen rom on my ATRIX and for some reason got stuck on the main Unlocked screen where it keeps looping over and over and it doesn't go anywhere. I've tried to enter the ANDROID RECOVERY mode in order to swap and reset it, but it doesn't allow me to. Can anyone help me, please? I don't really know what to do. I hope I can find some clues here, it is my only chance.

Google Sells Motorola Mobility To Lenovo For $2.91 Billion topic

http://tech.slashdot.org/story/14/01...or-291-billion