I need Odin flashable stock kit Kat file topic

Can anybody want to share a link or file for Odin flashable stock kit Kat file?.
I tried downloading from sammobile..but it takes forever. .
Thank you in advance.:D:thumbup:

Sent from my SGH-M919 using XDA Premium 4 mobile app

[Q] Deleted OS, Odin Fails, Computer won't recognize phone topic

I have spent days searching for solutions and everything I have tried failed.

I thought I did a factory restore but somehow deleted the entire operating system. I tried flashing an official ROM via Odin but it failed (I know it previously worked), and my PC won't recognize the phone. I do have a custom recovery, TWRP, but the backup was on a different custom recovery and I somehow got the phone to start into the ClockworkMod (?). Any ideas? I have researched extensively and have found nothing. Kies won't even recognize my phone.

I also cannot get the phone's drivers to install on my computer, and I have reinstalled them multiple times.

Can anyone help me? I feel like I've wasted 0 on a phone that is now useless (I did buy it refurbished but also bought a third-party warranty, and accessories so it added up fast.)

N7105 - SDCard Mode and ODIN topic

Hi I managed to to get to SDCARD Download mode from a dead boot N7105 using the SD Boot Repair SD. Odin recognizes this and phone was previously on 4.3 JellyBean already. Now when I'm trying to flash with Odin 3.09 , it says "There is no PIT partition" . Should I click the Phone Bootloader Update checkbox also? Need some advice from all the gurus here to guide me along this, thank you very much

[Q] Odin error during firmware installation topic

hi,

i got the international note 2. Now the model number shown in settings is GT-N7100. this should mean that phone is carrier free but when i boot it up, it shows the AT&T logo and it is filled with AT&T bloatware that cannot be uninstalled. i couldnt figure out what this meant so decided to restore it to stock firmware for international note 2.
i read the instructions and did it using Odin but following message shows up after i have selected the PDA and started the process. phone still works fine after this, boots up ok but the basic problem of software is not resolved

<ID:0/006> Checking MD5 finished Sucessfully..
<ID:0/006> Leave CS..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> sboot.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

read the forums, ppl suggested using odin v1.3, didnt work. please help me resolve this.

Galaxy Note II Stuck on System in Odin topic

<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img

My Galaxy Note II has been stuck on this for a while. I was trying to recover it via kies but it never worked so i tried out the Odin and this happened..

Please show me to any tutorial or post below a tutorial.

[Q] Unroot Problem ODIN failure topic

Hi
Im using samsung galaxy S3 GT-I9300 in india, which has been imported from US. It is on 4.1.1 and device status shows as modified. Tried updating it to the official firmware from the installation guides provided by XDA developers, but encountering ODIN failure, I mean ODIN status says fail, and my device say unsupport Dev_Type. My device binary count is 2.

Kindly help me resolve this issue and help me in upgrading my device.

Thanks
Srikanth Kata

Odin acting weird? topic

When I try to flash with Odin, nothing happens! This is what is says:

<OSM> All threads completed. (succeed 0 / failed 0)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_S5830i_XXLI1.tar.md5 is valid.
<OSM> MODEM_S5830i_DDLI1.tar.md5 is valid.
<OSM> CSC_S5830i_ODDLI1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)

And nothing happens to my Ace! Help!

Odin Crashes Help topic

Been trying to reroot my sch I500 phone is stock
tried 3 version 1.3, 1.85 & 3.09 and everytime i load PDA and click start it closes program. When i try to pit and pda the download completes on Odin but not completely on the phone. Yet phone still works normally

i have partial installation of dwm only shows 4 options when i 3 finger.

Help been at this for 4days already.

[Q]CWM recovery not flashing after odin and root topic

Hello all and thank you for your time. been doing this for a while and i cannot figure out what im doing wrong. hopefully someone can help me figure out what i missed. I was odin'ing back to try and fix a LTE modem issue. followed the sticky guide like i did originally to root. first wiped everything, then odin MDK (never OTA'd), flash MD2 kernel, ticked appropriate boxes, updated super su and binary, checked root with TBU, odin'ed MDK kernel, then flashed with rom manager CWM. root was granted at the respected times. everything seems right until i boot into recovery and the screen goes to the stock recovery and the android man has a red exclamation mark. the recovery is usable but it does not help me much..

thanks for the time and suggestions.

take care.
electroman789

Problem with CSC after flash via ODIN topic

Hey Guys.

I have a (big?) problem with stock firmwares.

I'm using ODIN v3.07.

I have to tell you, i tried this proccess many times, and they are all concluded well.

But the last time, when ODIN flash the firmware successfully, my 5830i goes to recovery mode to install the CSC file: the message is the following:

Code:

---

--Appling Multi-CSC --
E:Failed to read code file (Operation not permitted)
Installation aborted.

---

I tried with another firmwares, another ODIN version, installing a Custom Rom before trying ODIN again. No way to solve it. What do you think about that?

PS anyway, the phone works fine, i think. The firmware is installed, no bootloop, no chrases, seems all ok. But i want to know what the hell is that error.

Odin as a portable? topic

Does anyone know if there is a way to run Odin as a portable .exe? I have a bootlooping note 3 and I am at work and can't run Odin die to admin rights.

Restoring with Odin, not working. topic

I have a rooted SGH-i337, I used Kingo's root to root it. I recently had safestrap with a custom rom loaded but I recently deleted the rom and then uninstalled safestrap. I then tried to do a full restore using Odin...but no matter how hard I try, I can't seem to get it working.
I have tried using the MF3 files and when that didn't work, I tried using the MK2 files.
I just keep getting this.

Code:

---

<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CP_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I337ATTEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Removed!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

---

And a big ol' FAIL....can someone please help me restore my phone to it's original setting? :eek:

[Q] Odin Flashing Problems with Note 3 and Kitkat topic

I have rooted my Samsung Note 3 with a custom rom running Jellybean 4.3 with clockwork mod recovery. I have tripped knox due to rooting it. When Kitkat came out March 17th 2014, I wanted to upgrade and go back to official firmware with Kitkat to try it out. Since I have rooted my phone to run viper4android audio kernel I am unable to do an official OTA or Kies update. That said I went about downloading the new Bell Canada Note 3 firmware 4.4.2. I was told to flash a Jellybean Bell Firmware first before flashing the Kitkat version to avoid boot loops or other problems. Trying to do so with Odin in download mode ended in failure just trying to flash jellybean stock. Didnt get that far really. It showed a fail in the Note 3 screen to this effect in read this message (sw rev check fail : sbl1 fused 2 binary 1) . Odin didnt load like I am usually use to seeing by unzipping the firmware into a folder and adding it to the PDA field. After I loaded the .tar file (md5) file into pda it checked it and then told me its finished successfully but the next line it said CS Fail. After hitting start it said fail instantly in the odin window and on the Note 3 I did see a bar showing me the progress of install for 1 second until odin told me of the fail. Now my Note is in download mode and can't get past this problem to get it running again! Please any help would be greatfull to getting me past this problem and onto Kitkat or even back to Jellybean. Any other questions you may have I will supply you the info.

Thanks

Nervous Android user!

[Q] Back & Menu Not Working After Flash with ODIN .Please Help topic

after i flash with odin the back & menu key not work.
sorry for bad english!

[Q] stuck in odin mode topic

i tried to update my phone to 4.1.2 on samsung kies. while it was updating it fails. it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." i tried to use Firmware emergency recovery but that also fails. i tried taking the battery out and putting it back in. it goes straight to the odin mode. im not running on a custom rom. i have to stock rom of the sgh-i727. can someone please help mee

Can't escape encryption even after flashing stock with Odin topic

Hi,

I have a galaxy note 3 from Ireland, and I wanted to root it so I followed the instructions I found online. However, when it booted back in after ODIN it still askd me for the encryption pin. If I entered it the phone screen just went black.

So I downloaded the firmware and flashed that with ODIN, and even though it seems to flash successfully it still prompts me for the encrpytion pin. I know the pin, but it just goes to a blank screen.

Can anyone help me with this? I don't care if I lose my files, I just want to get the phone working again!

Thanks.

[Q] Problem with odin when up ROM topic

Hi guys, I met a problem when I try up rom 2.3.6 for galaxy mini S5570, I waited for 1h or more but I just received <ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..

I have no idea, I have just one file S5570DXKT7_S5570OLBKT3_XXV.tar.md5
Please help! Thank guys.

Attached Thumbnails

 

Used odin to upgrade to 4.4.2 and now unable to root topic

My note 3 was previously rooted with TWRP and CM11.
I wanted to upgrade my firmware to official 4.4.2 kit kat and root my device again to try a different rom.
However things went to the dumps and now I can't root my phone. I insert the md5 file into oden and let it run and everything passes but the phone just reboots into recovery in a cycle.
To get away from the cycle, I have to flash the official 4.4.2 firmware again, which causes me to setup my accounts and everything from the beginning :(

I need to know how to root for 4.4.2 succesfully, please help.

Also, when i check the storage (internal) capacity of my phone after flashing of the firmware, I see that it takes up 6 gig. Is that too much for a fresh firmware install?

Help tried to odin nab now bricked? topic

Hello all last night i odin mj4 to get back to stock then tried to odin nab firmware and i got this screen.
i have tried using kies3. Still looking through fourms on a fix.
any help would be great.

Attached Thumbnails

 

[Q] Kingo Root Stuck in Odin Mode downloading.... topic

Hi Guys,
I think I messed up note 3 my Note 3, SM-N900W8. I thought I would give Kingo Root a try to root my phone. Everything seemed to go well until it got stuck in Odin Mode screen , " Downloading, Do not turn Target Off"
Info on screen: Current Binary- Samsung Official
System Status- Custom
Reactivation Lock- OFF
Knox Kernel Lock- 0x0
Knox Warranty Void- 0x0
Attachment 2623810 Screen Capture.

How can I get out of this screen. Please advise.
Thanks Guys!!

Attached Thumbnails