[Q] Tab Pro 8.4 LTE - Difference between EU and UK models? topic

Hi,

Is there a difference between the European version of the Tab Pro 8.4 LTE and the UK version of the Tab Pro 8.4 LTE?

I have ordered what I thought was the UK version from a retailer, but it turns out that the order page now says EU model so just
wanted to see if there were any differences like in terms of 4G bands, processors etc?

Thanks

Camera quality difference between LB and UB topic

Had read online that some Z1 has different quality when unlocked bootloader due to drm or bionz.. Anyone care to share? As I'm still on the verge whether or not to unlocked bootloader..

Sent from my C6903 using Tapatalk

[Q] Something maybe between Brick and Bootloop topic

Anyone who can answer,
I own a Swipe Legend. Its specifications are listed below.
I last did 2 things due to which it may have happened.
1. I was using ROM Toolbox Pro to change my font and backup old. I didn't like the new font so restored my old one. But there were too many fonts in the backup, so I thought they were in different uses. I selected all and rebooted. My battery suddenly dropped to about 25% from 48% during changing font some minutes before, and the brightness of pre-boot image was high, I plugged it during that image. Rest is in 2nd reason why I think it could have happened.
2. I put it on charger, forgot it and slept. Later after about 4 hours or so, I did unplug it but it is not working since then. However, this has happened a couple of times with me.
I hope you can help.
Problem: Sorry for not stating the problem first, but I am putting in sequence of time.
Whenever I start it, I can do just 4 things:-
1.See the pre-boot image
2.See the boot animation(the reason I can not show it, as it shows that my phone was rooted. Other reason is that the 1 year warranty is over)
3.Go to the recovery mode
4.See the 'Android is upgrading....' screen
After the 'Android is upgrading....' screen, it goes back to boot animation, then back to the 'Android is upgrading....' screen, and finally after some time screen gets off and I can not turn it on, although I can turn on light of the buttons by power button. Screen gets on for battery notification, and I can see the 'Android is upgrading....' screen. I can always take it to recovery mode, but can not switch it off once it is on so I have to wait for battery to finish. So it may not be bootloop, because that happens just 1 time when it goes back to boot animation. It is also not bricked, as it can do the 4 things.
Solutions already tried:
1. I have hard reset the phone at first.
2. I tried adb and fastboot but they do not recognize my device, maybe due to resetting of USB debugging option after the reset
3. No ROM or CWM is available on my phone, after searching and even using Goo manager
4. I tried removing the SD card after reset, but condition is same
About the phone:-
Name: Swipe Legend
Model: Alps hexxing77_ics2
Android: v4.0.4
Memory: 4GB ROM+32GB SD+512MB RAM
Processor: 2x1.5GHz Dual core(But I think it to be 1GHz dual core due to analysis by apps like Pi)
Screen: 7 inch
Pixels: 800*480
Status: Originally rooted, but maybe root is lost after reset
Already experienced reset: Yes, but it was not rooted by that time
USB Debugging: Was on last time, but maybe offed after factory reset
More details: I can not get the links but it can be searched on amazon or a site like naaptol.com.(I'm from India so don't know any shopping sites of other countries)
If any detail is missing, you may ask.
Please help if you can

[Q] Switching between Sprint CDMA and GSM SIM cards and back again topic

I currently am using my nexus 5 (unlocked from Play Store) on sprint and I will be going out of the country for a couple weeks and want to use a local SIM card when I get there. I have a couple questions.

1) what do I need to do to switch from Sprint CDMA and LTE SIM to a foreign GSM SIM?

2) once I get back in the country what do I need to do to switch from the from the foreign GSM SIM back to my Sprint CDMA and LTE SIM

How to swap between External Sd card and Internal Storage in Grand? topic

Guys any tutorial or trick to make SD card the internal sd storage ?

I cannot manage all the games and apps in only 4 GB internal sd space given .

Moreover There are some problem in having internal sd (4 GB) . Like all the app backsup in that 4 GB space only which is not possible . Like whatsapp and moreover cwm also makes backup in that 4 gb space n which is not good in case someday I brick my phone etc etc.

So I want to swap between internal sd and external sd card . If anyone knows how to do it then please comment. :)

Sent from my GT-I9082 using XDA Premium 4 mobile app

How to insert space in dialer between first and last name topic

i've seen two suggested solutions; tapping * (star) as a space or simply continuing to type the name without a space. neither are working for me. any other suggestions? thanks!

[Q] Difference between XL39H and C6802? topic

Hi,

I recently bought a Z Ultra off ebay and when I received it realised that it was the XL39H Chinese version. It doesn't have gapps and most features only work in Chinese.

I'm wondering whether I can just flash another country's C6802 firmware onto it, or is this not possible due to the different model numbers? Are there any hardware differences between XL39H and C6802?

Someone said on another post that XL39H is just a sticker on the box and the phone itself still says C6802, but in my case it says XL39H in About Phone and on the device itself...

Thanks for your help!! :)

[Q] Major difference in 3G data speeds between ROMs topic

I just discovered a major difference between my 3G data speeds between ROMs on my HTC One

I've done a lot of tests to prove my point, I've been switching between stock Three UK ROM/firmware (Android 4.3) and ARHD (Android 4.3-4, US Dev / international firmware) for 7 consecutive days, and every day performed 5 "control" speed test, on each ROM/Firmware, in same location.

1) on Stock Three UK ROM/Firmware I'm getting on average 6Mbps (max 8Mbps, min 1.5 Mbps)
2) on any others I'm getting on avg. 2-3Mbps (max 5Mbps, min 1Mbps)

So my question is, why stock branded ROM/firmware is on average 3Mbps faster than any other ROM/firmware configuration,
and is there any way to improve speeds on non branded rom?

*I think that's because only stock is actually using DC-HSDPA, is it possible to force enabling of it on other roms?

Different displays between D820 and D821 (worse) topic

I had a D820 from the US Play store and I just bought a new D821 from the Carphone warehouse in the UK because I wanted to use the 4G.

The displays of both models look similar but the display on the D821 is a little bit "sticky".
For example, It's hard to swipe for notifications and hard to swipe in Swiftkey. My finger feels very hard resistance.
On the D820 it's much better (actually, I like it very much there). I also compared it to other phones.

Do you also see this on your D821 or I might have a defected unit?

[Q] Differences between 10.1.3 Stable and 10.1.3 RC topic

Can anyone enlighten me? I just installed the stable version and it is working well so far.

Tia

Is there really that much difference between 4.1.2 and 4.4? topic

I'm using Stock 4.1.2 and except 5ghz wifi isn't working am pretty happy with it.

Do the later custom roms add enough performance enhancements to warrant the effort? For me the 'proper' dpi and tablet layout of stock is highly preferred so any other layout is really not desired.

Thanks.

Sent from Galaxy i9502

[Q] What is the difference between normal hotspot and rooted wifi teathering? topic

hi,
i want to know the difference between normal hotspot and rooted wifi teathering on my htc.
does the wifi teathering mean no data is spent from my monthly plan?

should I transfer 'iterators' between functions? topic

On Fri, 24 Jan 2014 22:37:37 -0800, seaspeak wrote:

> take the following as an example, which could work well. But my concern
> is, will list 'l' be deconstructed after function return? and then
> iterator point to nowhere?

That would be a pretty awful bug for Python, since it would like lead to
a core dump. But no, it works fine, as you can see by trying it at the
interactive interpreter:

py> def test():
.... L = [1, 2, 4, 8, 16]
.... return iter(L)
....
py>
py> for i in test():
.... print(i)
....
1
2
4
8
16


In fact, we don't even need a function to see the same effect:


py> L = [1, 2, 4, 8, 16]
py> it = iter(L)
py> del L
py> L = "something else"
py> for i in it:
.... print(i)
....
1
2
4
8
16


Python keeps track of when objects are in use, and does not destroy them
so long as it is in use. In the meantime, you can exit the function,
unbind (delete) the variable, re-assign to something else, whatever, and
you should never get a core dump.

(I've only ever seen a single core dump in Python in 15+ years.)



--
Steven

[Q] What is the difference between CM11 and a custom ROM based off of it topic

Can they run the same mods themes etc ?

Differences between two identical N7's ??? topic

Hello,
I've noticed some strange differences between two identical N7's:
I bought a N7 (16 GB, WiFi) in May 2013, it has been updated to KitKat 4.2.2.
A month ago my brother bought another one, it's also updated to KiKat 4.2.2.
Both tablet works fine, I think...
But..., on my brothers tablet the Asphalt 8 game (and a few other) downloaded directly from GooglePlay runs fine, on my tablet not even want to start.
About a couple of times I reset my tablet to it's factory (default) settings, reinstall the apps, but nothing changed, some apps (usually heavier games) still refuse to start.:(
What's wrong with my N7?

what is the difference between cid: htc__001 and cid: BS_US001 ? topic

hi

i am want ask if i install rom cid: htc__001 on this device cid: BS_US001 will be work or she is don't compatible ?

what is diffrent between 4.4.2 polan and baltic ( new release ) ? topic

HI

there is new 4.4.2 on sammobile : www.sammobile.com/firmwares/3/?download=24547

just the product code is different !!

my story : i have problem with 4.4.2 ... after flashed the poland version , it has problem with my SIM card
after restart it says com.android.phone has stopped working. why ? i don't know .... everything is working but i don't know that the *** is that . when i remove my sim card it working well !!!

now , what do u think . does it wrth to flash the baltic version ? maybe it can heal my rom ?? yes ?